真空压机 COLOMBO PF PC5

木材加工设备 / 压床 / 真空压机

真空压机 COLOMBO PF PC5
技术指标
Размеры рабочей поверхности
2850 x 1296
мм

Elect./Voltage: 380/400 V, 50/60 Hz, 3 Ph.
COLOMBO "PF PC 5" Automatic Vacuum Shuttle Press System for cabinet doors using thermoformed materials - with Vacuum Destacking. -- The Press is designed for lamination of pre-shaped and glued panels with PVC & Polypropylene films without the use of a membrane. This concept allows for cycle times as short as (1-1/2 - 2) Min depending on the 0.3 - 1 mm max. film [...] & Specifications: -- Platen dimensions: 2,850 mm x 1,296 mm (112" x 51") usable platen area. -- End loading with "synchronized in-and-out" shuttle mylar belt table, shuttle loading tray runs on mylar belt & "THK" precision linear guides with automatic movement in-and-out of Press for continuous operation. -- Solid steel top & bottom platens through bored for thermal oil flow, upper press platen opens-and-closes with pressure from large dia. down stroke hydr. cylinders with 4-1/2" in diameter; 380 metric tons overall pressure. -- Electrically heated thermal oil heating system, max. platen temperature 100 deg. C. -- Twin-tank vacuum system with high capacity accumulator tank for very rapid draw down of the film over the shaped panels, mounted on top of [...] & Features: -- Separate electrical control cabinet houses the programmable SIEMENS "SPS" controller and operator control panel, and features error diagnostic via phone modem. -- The concept of working without a membrane allows for forming the film into deep and vertical sided profiles, very small profiles like vein lines, and lipped profiles which are not possible using a membrane. -- Working without a membrane permits the higher working temperatures required for laminating the environmentally preferred polypropylene films and saves the expense of regularly replacing damaged/worn membranes. -- Complete with: 6-Roll PVC dispensing system w/trimmer with 6-roll and 57" width capacity.

报价单
计算设备的最终价格,包含所有税费,关税费用,运输费等我们服务引起的费用。 详细情节...
查询报价单报价单样本。
供应商
制造商
COLOMBO R. S.r.l. logo
状态
良好
制造年期
2002
位置
美国
已被加入
2016年10月31日
详细描述

二手 真空压机 COLOMBO PF PC5

价格不含增值税
64 900EUR
价格含增值税
74 635EUR
供应商简介
国家
美国
城市
Charlotte
电话
800.374.5009
服务中心
您的处所
购买 真空压机 COLOMBO PF PC5 , 卖出 二手 真空压机 COLOMBO PF PC5, 压床 租赁, 压床 货运费, 压床 美国, 赊购真空压机 COLOMBO PF PC5 , 从美国交货, 出售木材加工设备 , 压床目录 , 设备状态: 二手, 供应商 压床 来自 美国, 真空压机 COLOMBO PF PC5报关费, 新/二手木材加工设备价格目录, 赊购真空压机 COLOMBO PF PC5, 从美国进行交货的运输公司, 从美国交货, 真空压机 COLOMBO PF PC5 价格