FRIZ MFP 膜壓機

木材加工设备 / 压床 / 真空压机

FRIZ MFP 膜壓機
技术指标
Размеры рабочей поверхности
3000 x 1600
мм

Elect./Voltage: 400 V, 50/60 Cy, 3 Ph.
FRIZ "MFP" Membrane Press with Double shuttle with loading both trays on one end (space saving feature): -- Platen dimensions of 1,600 mm (63") x 3,000 mm (118") with a useful pressing cap. 1,350 mm (53.1") x 2,750 mm (108.3"); 19-1/2" (500 mm) opening, chamber height for a max. material thickness of 2-1/8" (54 mm), max. specific platen pressure of 5 bar or 74 PSI on ea. platen. --Actual size of heating platens 118" x 63" (3,000 x 1,600 mm), upper platen with membrane with electric resistance heat, lower platen with vacuum table provided by large cap. vacuum pump allows processing of concave surfaces. -- (6) Large dia. down stroke hydraulic cylinders with 500 mm (19-1/2") stroke developing approx 425 [...] & Complete with: --Non-stop operation, loading on top tray while bottom tray is in the press; manual loading-and-unloading for each shuttle tray, continuous operation. When one table/tray is pushed in the other table is pushed out with the same operation and in an elliptical configuration. Hot air recycler for the compressed air used in pressure chamber and 15 HP hydraulic pump unit.. -- Pin System: --One of the trays is outfitted with a manual RAPHA JIG PINSYSTEN. Consists of a steel plate, with pins mounted, that is placed on top of the aluminum tray. Pins are slightly magnetic each is adjusted manually to position as needed. Via a unique eccentric, double pivot, rotational motion, thus extends the coverage area of each pin. This feature eliminates the need for wood spacer needing a different jig of each size door. Where not required, the steel plate with mounted pins can be removed and with the aluminum tray with suction holes is available using wood spacer [...] & Operator Interface: -- Use of a user-friendly PLC "HOMATIC NC 16" control ensures the possibility to set & memorize variable operation parameters like time, pressure, vacuum & temperature. -- The PLC control also provides for a MODE-2 cycle that allows the press to work with or without a membrane. When working with veneers, and high-gloss vinyls the membrane must be used., evened out dimensional tolerances, shorter pressing time, lower energy requirement & a higher degree of efficiency. -- This Press has a special execution for the table height that is at 33", which made it easier for loading and unloading. -- Actual model is MFP 22/16/30.

报价单
计算设备的最终价格,包含所有税费,关税费用,运输费等我们服务引起的费用。 详细情节...
查询报价单报价单样本。
供应商
FRIZ Kaschiertechnik GmbH logo
状态
良好
制造年期
1998
位置
美国
已被加入
2016年10月31日
详细描述

二手 FRIZ MFP 膜壓機

供应商简介
国家
美国
城市
Charlotte
电话
800.374.5009
服务中心
您的处所
购买 FRIZ MFP 膜壓機 , 卖出 二手 FRIZ MFP 膜壓機, 压床 租赁, 压床 货运费, 压床 美国, 赊购FRIZ MFP 膜壓機 , 从美国交货, 出售木材加工设备 , 压床目录 , 设备状态: 二手, 供应商 压床 来自 美国, FRIZ MFP 膜壓機报关费, 新/二手木材加工设备价格目录, 赊购FRIZ MFP 膜壓機, 从美国进行交货的运输公司, 从美国交货, FRIZ MFP 膜壓機 价格