IDM IDIMATIC/66-20 QMS 封边机

木材加工设备 / 封边机械

IDM IDIMATIC/66-20 QMS 封边机
技术指标
類型
全自动
最小加工板材 宽度
60
mm.
最小加工板材 长度
140
mm.
加工板材厚 min
10
mm.
加工板材厚 max
50
mm.
卷式封边带厚 max
3
mm

Elect./Voltage: 230 V, 60 Cy, 3 Ph.
3/4" Edgebanding thickness cap., 10 - 50 mm (3/8" - 2") panel thickness, 60 mm (2-3/8") min. panel width & 140 mm (5-1/2") min. length. -- Equipped with: "GR/3-1" Pre-milling station with (2) 3 HP - 12,000 RPM counter rotating vertical milling heads, both w/pneumatic jump control, 30 mm spindles and SIKO digital readouts for setup & adjustments, fully enclosed by noise insulated cabin. -- Automatic strip & coil feed magazine with 3 mm PVC guillotine (9" pack cap. for strips); 8.8 Lbs cap. overhead granular glue "Quick Melt" hopper feeding compact size, Teflon coated lower applicator glue pot, 1" dia. glue applicator roller, reversible rotation by flip of switch. -- Pressure section with (1) large dia. (7-7/8") clutch controlled drive roller and (4) jump action, pneumatic pressure idle rollers, horiz. adj. w/digital indicator. --_ Workstations: "IN 45/20" Front & rear end trims (motors 0.9 HP - 14,400 RPM ea.), motors tilt 0° - 12° on horiz. plane, 2nd blade setup allows 45° chamfer cut; "R 94/1.8" top & bottom rough trims (motors 2.5 HP - 12,000 RPM ea.), non tilting; "RSM/0.5-2P" top & bottom "fine/bevel/profile" multi-function trims (motors 0.7 HP - 12,000 RPM ea.), tilts 0° - 15° for bevel and 3 mm PVC corner round (prepared for "quick change" of motors, for interchangeable 2nd set of bevel/radius trim units). -- "PR 1-2-3-4/94" Corner rounding units for trimming leading & trailing upper and lower edge/corners when edgebanding all (4) sides or when edgebanding "soft- or postformed" panels (4 motors 0.7 HP - 12,000 RPM ea.), 1" max. radius; "RAS/94-D-EP" top & bottom scrapers for up to 5 mm thick PVC banding, pneumatic pressure control for scraping knives, digital readouts, overhead PVC filter unit eliminates PVC chips being sucked in by dust collector. -- "RB" Top & bottom PVC edge color & surface reactivation unit, LEISTER hot air blower with temperature adjustment; "SP-2M" top & bottom "oscillating" buffing (0.4 HP - 1,680 RPM motors), units tilt 0° - 30°. -- Multi-function trimmer, corner rounding unit & scraper with "pneumatic exclusion" controlled from operator panel. - Hardened steel link feed chain with "anti-slip" 80 mm wide rubber pads, (2) feed speeds 40 & 60 FPM, with 3 HP/4.5 HP drive; motorized adjustment of top pressure beam. -- Complete with: Heated infeed fence, automatic panel spacing control, remote control jog button, insulated sound enclosure over all trim stations; rotating operator control panel at eye-level height, 15 KVA - 240 Hz frequency inverter & compl. set of tooling.

报价单
计算设备的最终价格,包含所有税费,关税费用,运输费等我们服务引起的费用。 详细情节...
查询报价单报价单样本。
供应商
制造商
idm woodworking machinery logo
状态
良好
制造年期
1997
位置
美国
已被加入
2016年10月13日
详细描述

二手 IDM IDIMATIC/66-20 QMS 封边机

价格不含增值税
9 476.52EUR
价格含增值税
10 898EUR
供应商简介
国家
美国
城市
Charlotte
电话
800.374.5009
服务中心
您的处所
购买 IDM IDIMATIC/66-20 QMS 封边机 , 卖出 二手 IDM IDIMATIC/66-20 QMS 封边机, 封边机械 租赁, 封边机械 货运费, 封边机械 美国, 赊购IDM IDIMATIC/66-20 QMS 封边机 , 从美国交货, 出售木材加工设备 , 封边机械目录 , 设备状态: 二手, 供应商 封边机械 来自 美国, IDM IDIMATIC/66-20 QMS 封边机报关费, 新/二手木材加工设备价格目录, 赊购IDM IDIMATIC/66-20 QMS 封边机, 从美国进行交货的运输公司, 从美国交货, IDM IDIMATIC/66-20 QMS 封边机 价格